The MVD-EV9789-V3 board converts an MPEG TS stream into an IF or RF signal and supports most of the digital TV standards (DVB-C, J.83B, DVB-T, ATSC, DVB-S, ...).
It has been developed for the evaluation of our IP cores:

• DVB-C J.83 Annex A/C modulator
• J.83 B cable modulator
• DVB-T/H modulator
• ATSC modulator
• DVB-S modulator
• DVB Remultiplexer N-to-M
• Hardware UDP/IP stack
• UDP/RTP transmitter for IPTV

MVD-EV9789-V3 board is "SFN Ready" for optional Single Frequency Networks.

Inputs/Ouputs

• FMC connector to connect to Xilinx evaluation board
• 1 x USB input for cores configuration (USB connector on Xilinx board)
• 1 x 10 MHz Clock Ref input (SMA connector on Xilinx board)
• 1 x 1 PPS input (SMA connector on Xilinx SP605 board)
• 1 x SPI (Synchronous Parallel Interface) TS input (Female DB-25 connector)
• 2 x ASI (Asynchronous Serial Interface) TS inputs (BNC connectors)
• 2 x ASI (Asynchronous Serial Interface) TS outputs (BNC connectors)
• 1 x MPEG TS over UDP/IP input/output (RJ45 connector on Xilinx board)
• 1 x IF/RF output (36 MHz to 1 GHz) (BNC connector)

Typical applications

• Evaluation of MVD Cores' modulators/TS processing IP cores
• Test equipment for demodulation devices

Click to enlarge image

• MVD-EV9789-V3 board
• Documentation
  • Hardware setup guide
  • Schematics and PCB files – Information you need to accelerate layout and development of your own board.

MVD-EV9789-V3 board is sold only in addition to an evaluation version of one of our IP Cores.

MVD-EV9789-V3 operates with a Xilinx SP605, ML605 or KC705 evaluation boards which are not supplied by MVD Cores.
Xilinx SP605, ML605 or KC705 evaluation boards are available from XILINX at www.xilinx.com.